AC / DC Power Flooring Radiant Panel Test With Alarm Display Function

Product description:

This standard specifies test apparatus and test methods for the evaluation of flame spread, heat release and smoke generation characteristics of vertically installed bunched wire or cable or cable under specified test conditions. During the test, the cables or cables were installed on the vertical standard ladder, and the burning behavior and combustion performance of the cable were evaluated by using the specified ignition source. The combustion data of the early stage of the cable fire was obtained through the test. The heat release rate The test reflects the risk of fire spreading along the cable and the potential impact of the fire source on adjacent areas. The smoke density test shows the visibility of the fire area and the dangers posed to the personal safety of the flue gas. (FSR), heat release rate (HRR), total heat release (THR), smoke generation rate (SPR), total smoke production (TSP), combustion growth of cable or cable under specific combustion conditions Rate index (FIGRA), and combustion of the drip / micro materials and other characteristics.

Standard:

GB / T 31248-2014 Cable or fiber optic cable under fire conditions, flame spread, heat release and smoke characteristics.
experiment method.

Features:
1. Advanced industrial appearance and control design
2. Combustor structure: steel combustion chamber, the inner wall of stainless steel plate, the outer wall of A3 steel paint, filled with mineral wool insulation, equipped with steel ladder to the top of the combustion chamber, and installed in the top of the room steel bar, to facilitate the room Maintain equipment and improve safety.
3. By the axial fan to provide air supply, and by the inverter control of air supply.
4. Stainless steel smoking hood and exhaust pipe (diameter 400mm), beautiful corrosion resistance.
5. Using two-way probe differential pressure measurement device, import differential pressure sensor, the range is 0 ~ 500Pa.
6. K-type thermocouple with a diameter of 1.5mm.
7. The sample line is equipped with a three-stage filtration system to ensure clean sample gas flow to the analyzer and a flow-restricting and diverting device to ensure sample gas flow into the analyzer to improve the analyzer's accuracy and service life.
8. The ignition source consists of an imported ribbon type propane gas burner and an imported venturi mixer. The fire surface should be a flat metal plate with 242 diameters of 1.32mm diameter, one on each side of the fire board Row of holes, these guide holes can maintain a stable flame combustion.
9. MFC (mass flow controller) can be used to control the propane gas flow, higher accuracy.
10. The use of adjustable light source system and the use of imported silicon optical amplifier optical receiver system; data stable and accurate, and is equipped with fully automatic control of the seven filter correction mechanism, the optical path of automatic correction.
11. Gas analyzer can accurately measure the gas in the O2, CO2 concentration, resolution of 0.01%.
12. By the inverter control pipe fan to adjust the volume of smoke exhaust pipe flow.
13.19 inch standard cabinet + computer control.
14. PC + Labview professional software control.
(HRR), total heat release (THR), smoke production rate (SPR), total smoke production (TSP), combustion growth rate index (FIGRA) were calculated automatically, and the results of real- Parameter curve.
16. Alarm display function.
17. Control box with USB / RS232 serial port, can be external desktop / notebook computer operation and control.